Bootdata ok (command line is ro root=/dev/hdc7) Linux version 2.6.14.3-1.1644_FC4smp-cracauer (root@libber.cons.org) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #7 SMP Sun Dec 25 19:04:12 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fffe000 (ACPI data) BIOS-e820: 000000007fffe000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa190 ACPI: XSDT (v001 A M I OEMXSDT 0x12000505 MSFT 0x00000097) @ 0x000000007fff0100 ACPI: FADT (v003 A M I OEMFACP 0x12000505 MSFT 0x00000097) @ 0x000000007fff0290 ACPI: MADT (v001 A M I OEMAPIC 0x12000505 MSFT 0x00000097) @ 0x000000007fff0390 ACPI: OEMB (v001 A M I AMI_OEM 0x12000505 MSFT 0x00000097) @ 0x000000007fffe040 ACPI: SRAT (v001 A M I OEMSRAT 0x12000505 MSFT 0x00000097) @ 0x000000007fff5990 ACPI: DSDT (v001 1HQC8 1HQC8003 0x00000003 INTL 0x02002026) @ 0x0000000000000000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: PXM 2 -> APIC 4 -> Node 2 SRAT: PXM 2 -> APIC 5 -> Node 2 SRAT: PXM 3 -> APIC 6 -> Node 3 SRAT: PXM 3 -> APIC 7 -> Node 3 SRAT: Node 0 PXM 0 100000-3fffffff SRAT: Node 1 PXM 1 40000000-7fffffff SRAT: Node 0 PXM 0 0-3fffffff Using 20 for the hash shift. Max adder is 7ffeffff Bootmem setup node 0 0000000000000000-000000003fffffff Bootmem setup node 1 0000000040000000-000000007ffeffff On node 0 totalpages: 262046 DMA zone: 3999 pages, LIFO batch:1 Normal zone: 258047 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 On node 1 totalpages: 262127 DMA zone: 0 pages, LIFO batch:1 Normal zone: 262127 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Processor #2 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) Processor #4 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) Processor #5 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) Processor #6 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) Processor #7 15:1 APIC version 16 ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x0d] address[0xfeafe000] gsi_base[40]) IOAPIC[1]: apic_id 13, version 17, address 0xfeafe000, GSI 40-46 ACPI: IOAPIC (id[0x0e] address[0xfeaff000] gsi_base[47]) IOAPIC[2]: apic_id 14, version 17, address 0xfeaff000, GSI 47-53 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) Checking aperture... CPU 0: aperture @ 0 size 32 MB No AGP bridge found Built 2 zonelists Kernel command line: ro root=/dev/hdc7 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2200.015 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 2055472k/2097088k available (2447k kernel code, 41228k reserved, 1431k data, 236k init) Calibrating delay using timer specific routine.. 4406.74 BogoMIPS (lpj=8813489) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Node 0 -> Core 0 mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. Booting processor 1/8 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4400.38 BogoMIPS (lpj=8800765) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Node 0 -> Core 1 Dual Core AMD Opteron(tm) Processor 875 stepping 00 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 357 cycles, maxerr 1275 cycles) Booting processor 2/8 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 4400.39 BogoMIPS (lpj=8800795) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2(2) -> Node 1 -> Core 0 Dual Core AMD Opteron(tm) Processor 875 stepping 00 CPU 2: Syncing TSC to CPU 0. CPU 2: synchronized TSC with CPU 0 (last diff -371 cycles, maxerr 1053 cycles) Booting processor 3/8 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 4400.36 BogoMIPS (lpj=8800737) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3(2) -> Node 1 -> Core 1 Dual Core AMD Opteron(tm) Processor 875 stepping 00 CPU 3: Syncing TSC to CPU 0. CPU 3: synchronized TSC with CPU 0 (last diff 37 cycles, maxerr 1072 cycles) Booting processor 4/8 APIC 0x4 Initializing CPU#4 Calibrating delay using timer specific routine.. 4400.37 BogoMIPS (lpj=8800745) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 4(2) -> Node 1 -> Core 0 Dual Core AMD Opteron(tm) Processor 875 stepping 00 CPU 4: Syncing TSC to CPU 0. CPU 4: synchronized TSC with CPU 0 (last diff -380 cycles, maxerr 1068 cycles) Booting processor 5/8 APIC 0x5 Initializing CPU#5 Calibrating delay using timer specific routine.. 4400.37 BogoMIPS (lpj=8800758) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 5(2) -> Node 1 -> Core 1 Dual Core AMD Opteron(tm) Processor 875 stepping 00 CPU 5: Syncing TSC to CPU 0. CPU 5: synchronized TSC with CPU 0 (last diff -381 cycles, maxerr 1066 cycles) Booting processor 6/8 APIC 0x6 Initializing CPU#6 Calibrating delay using timer specific routine.. 4400.40 BogoMIPS (lpj=8800802) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 6(2) -> Node 1 -> Core 0 Dual Core AMD Opteron(tm) Processor 875 stepping 00 CPU 6: Syncing TSC to CPU 0. CPU 6: synchronized TSC with CPU 0 (last diff -472 cycles, maxerr 2001 cycles) Booting processor 7/8 APIC 0x7 Initializing CPU#7 Calibrating delay using timer specific routine.. 4400.38 BogoMIPS (lpj=8800772) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 7(2) -> Node 1 -> Core 1 Dual Core AMD Opteron(tm) Processor 875 stepping 00 CPU 7: Syncing TSC to CPU 0. CPU 7: synchronized TSC with CPU 0 (last diff 194 cycles, maxerr 1633 cycles) Brought up 8 CPUs Disabling vsyscall due to use of PM timer time.c: Using PM based timekeeping. testing NMI watchdog ... OK. checking if image is initramfs... it is NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Root Bridge [PCIB] (0000:04) PCI: Probing PCI hardware (bus 04) ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *9 ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *5 ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *11 ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. pnp: 00:0b: ioport range 0x680-0x6ff has been reserved pnp: 00:0b: ioport range 0x295-0x296 has been reserved pnp: 00:0b: ioport range 0x778-0x77f has been reserved pnp: 00:0b: ioport range 0xb78-0xb7f has been reserved pnp: 00:0b: ioport range 0xf78-0xf7f has been reserved PCI: Bridge: 0000:00:09.0 IO window: a000-afff MEM window: fc300000-fe3fffff PREFETCH window: 88000000-880fffff PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:04:01.0 IO window: f000-ffff MEM window: fe700000-fe9fffff PREFETCH window: disabled. PCI: Bridge: 0000:04:02.0 IO window: e000-efff MEM window: fe600000-fe6fffff PREFETCH window: disabled. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1136887853.636:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] ACPI: CPU0 (power states: C1[C1]) ACPI: CPU1 (power states: C1[C1]) ACPI: CPU2 (power states: C1[C1]) ACPI: CPU3 (power states: C1[C1]) ACPI: CPU4 (power states: C1[C1]) ACPI: CPU5 (power states: C1[C1]) ACPI: CPU6 (power states: C1[C1]) ACPI: CPU7 (power states: C1[C1]) Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... Probing IDE interface ide1... hdc: Maxtor 6Y060P0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... hdc: max request size: 128KiB hdc: 120103200 sectors (61492 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133) hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 > hdc3: ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.39 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 8 AMD Athlon 64 / Opteron processors (version 1.50.4) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure Freeing unused kernel memory: 236k freed Write protecting the kernel read-only data: 858k SCSI subsystem initialized libata version 1.12 loaded. sata_nv version 0.8 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xCC00 irq 201 ata2: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xCC08 irq 201 input: AT Translated Set 2 keyboard on isa0060/serio0 ata1: no device found (phy stat 00000000) scsi0 : sata_nv ata2: no device found (phy stat 00000000) scsi1 : sata_nv ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 21 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 209 ata4: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 209 ata3: no device found (phy stat 00000000) scsi2 : sata_nv ata4: no device found (phy stat 00000000) scsi3 : sata_nv kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 42 (level, low) -> IRQ 217 scsi4 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs ACPI: PCI Interrupt 0000:06:03.1[B] -> GSI 43 (level, low) -> IRQ 225 scsi5 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 47 (level, low) -> IRQ 233 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:05:03.1[B] -> GSI 48 (level, low) -> IRQ 50 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: irq 58, io mem 0xfe4e0000 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 201, io mem 0xfe4fd000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com EXT3 FS on hdc7, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hdc2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdc8, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1052216k swap on /dev/hdc5. Priority:-1 extents:1 across:1052216k input: PC Speaker loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.27 Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.7 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.5 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized i2c_adapter i2c-1: : Unrecognized stepping 0x45. Defaulting to ADM1026. i2c_adapter i2c-1: : Unrecognized stepping 0x45. Defaulting to ADM1026. parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP] lp0: using parport0 (interrupt-driven). lp0: console ready NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80475c00(lo) IPv6 over IPv4 tunneling driver e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation eth1: no IPv6 routers present e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex eth0: no IPv6 routers present cpufreq: No CK804 ISA bridge detected. cpufreq: Detected CK804 ISA bridge revision A3 cpufreq: FSB changing is dangerous and can lead to crashes and data loss ------------------------------- cpufreq: CPU 0: cpufreq: current multiplier=11 cpufreq: start multiplier=11 cpufreq: max multiplier=11 cpufreq: current voltage=1350 mv cpufreq: start voltage=1350 mv cpufreq: max voltage=1400 mv cpufreq: min voltage=800 mv cpufreq: max ramp voltage=1400 mv cpufreq: change pending=0 ------------------------------- ------------------------------- cpufreq: CPU 1: cpufreq: current multiplier=11 cpufreq: start multiplier=11 cpufreq: max multiplier=11 cpufreq: current voltage=1350 mv cpufreq: start voltage=1350 mv cpufreq: max voltage=1400 mv cpufreq: min voltage=800 mv cpufreq: max ramp voltage=1400 mv cpufreq: change pending=0 ------------------------------- ------------------------------- cpufreq: CPU 2: cpufreq: current multiplier=11 cpufreq: start multiplier=11 cpufreq: max multiplier=11 cpufreq: current voltage=1350 mv cpufreq: start voltage=1350 mv cpufreq: max voltage=1400 mv cpufreq: min voltage=800 mv cpufreq: max ramp voltage=1400 mv cpufreq: change pending=0 ------------------------------- ------------------------------- cpufreq: CPU 3: cpufreq: current multiplier=11 cpufreq: start multiplier=11 cpufreq: max multiplier=11 cpufreq: current voltage=1350 mv cpufreq: start voltage=1350 mv cpufreq: max voltage=1400 mv cpufreq: min voltage=800 mv cpufreq: max ramp voltage=1400 mv cpufreq: change pending=0 ------------------------------- ------------------------------- cpufreq: CPU 4: cpufreq: current multiplier=11 cpufreq: start multiplier=11 cpufreq: max multiplier=11 cpufreq: current voltage=1350 mv cpufreq: start voltage=1350 mv cpufreq: max voltage=1400 mv cpufreq: min voltage=800 mv cpufreq: max ramp voltage=1400 mv cpufreq: change pending=0 ------------------------------- ------------------------------- cpufreq: CPU 5: cpufreq: current multiplier=11 cpufreq: start multiplier=11 cpufreq: max multiplier=11 cpufreq: current voltage=1350 mv cpufreq: start voltage=1350 mv cpufreq: max voltage=1400 mv cpufreq: min voltage=800 mv cpufreq: max ramp voltage=1400 mv cpufreq: change pending=0 ------------------------------- ------------------------------- cpufreq: CPU 6: cpufreq: current multiplier=11 cpufreq: start multiplier=11 cpufreq: max multiplier=11 cpufreq: current voltage=1350 mv cpufreq: start voltage=1350 mv cpufreq: max voltage=1400 mv cpufreq: min voltage=800 mv cpufreq: max ramp voltage=1400 mv cpufreq: change pending=0 ------------------------------- ------------------------------- cpufreq: CPU 7: cpufreq: current multiplier=11 cpufreq: start multiplier=11 cpufreq: max multiplier=11 cpufreq: current voltage=1350 mv cpufreq: start voltage=1350 mv cpufreq: max voltage=1400 mv cpufreq: min voltage=800 mv cpufreq: max ramp voltage=1400 mv cpufreq: change pending=0 ------------------------------- Machine check events logged